Setting Command; Cf_Lang Command; Cf_Menuposition Command; Cf_Inputbutton Command - Sanyo PLC-WM5500/L - 5500 Lumens Manual

PLC-WM5500/WM5500L Expand Serial Command Functional Specifications

8.10 Setting Command

8.10.1 CF_LANG Command

Command "CF_LANG_%1" [CR]
"ENG" --------------------------- Select ENGLISH
"DEU" --------------------------- Select German
"FRA" --------------------------- Select French
"ITA" ----------------------------- Select Italian
"ESP" ---------------------------- Select Spanish
"POR" --------------------------- Select Portuguese
%1
"NED" --------------------------- Select Dutch
"SVE" --------------------------- Select Swedish
"JPN" --------------------------- Select Japanese
"CHI" ---------------------------- Select Chinese
"KOR" --------------------------- Select Korean
"RUS" --------------------------- Select Russian
Set language for OSD (Available only in the normal Power ON status)
Details The language set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.10.2 CF_MENUPOSITION Command

Command "CF_MENUPOSITION_%1" [CR]
%1 "SET" ------------------ Move the menu display to next position
Change the menu position
(Available in normal Power ON status only).
The position set by this command is stored in EEPROM and its setting is effective
after ALL is OFF.
Details
Position: center – bottom left – bottom right – top left – top right – center – ...
Menu display appears with the first command when menu display is not shown on
the screen
Acceptable
Response
Unacceptable

8.10.3 CF_INPUTBUTTON Command

Command "CF_INPUTBUTTON_%1" [CR]
"MODE1" ------------------------- Set Input button operation to MODE1
%1 "MODE2" ------------------------- Set Input button operation to MODE2
"MODE3" ------------------------- Set Input button operation to MODE3
Set Input button operation mode. (Available in normal Power ON status only).
Details The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
40/88