PLC-WM4500/WM4500L Expand Serial Command Functional Specifications
8.5.7
CF_DLINE Command
Command
"CF_DLINE_%1" [CR]
"0100-nnnn" ----------- Directly specify setting value of Display Line
"nnnn" indicates maximum value, which is current value of (Total Line - Position V).
%1
"UP" ------------------- Increment setting value of Display Line by 1
"DN" ------------------- Decrement setting value of Display line by 1
Set setting value of Display Line in PC signal (Available only in the normal Power
ON status)
Details
The value set by this command will not be stored in the projector's memory.
Therefore, when the power is turned to ALL OFF status, the value returns to the
original setting.
Acceptable
Response
Unacceptable
8.5.8
CF_PCSTORE Command
Command
"CF_PCSTORE_%1" [CR]
"1" --------------------------- Store current value of PC Adjust to Mode1
"2" --------------------------- Store current value of PC Adjust to Mode2
"3" --------------------------- Store current value of PC Adjust to Mode3
"4" --------------------------- Store current value of PC Adjust to Mode4
"5" --------------------------- Store current value of PC Adjust to Mode5
%1
"6" --------------------------- Store current value of PC Adjust to Mode6
"7" --------------------------- Store current value of PC Adjust to Mode7
"8" --------------------------- Store current value of PC Adjust to Mode8
"9" --------------------------- Store current value of PC Adjust to Mode9
"10" ------------------------- Store current value of PC Adjust to Mode10
Store current value of PC Adjust (each parameter status such as Total dots) to
Mode1-10. This command operates the same way as storing to Mode1-10 in
Details
PC Adjust Menu.
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.5.9
CF_PCMODEFREE Command
Command
"CF_PCMODEFREE_%1" [CR]
"1" --------------------------- Set Mode1 to Free status
"2" --------------------------- Set Mode2 to Free status
"3" --------------------------- Set Mode3 to Free status
"4" --------------------------- Set Mode4 to Free status
"5" --------------------------- Set Mode5 to Free status
%1
"6" --------------------------- Set Mode6 to Free status
"7" --------------------------- Set Mode7 to Free status
"8" --------------------------- Set Mode8 to Free status
"9" --------------------------- Set Mode9 to Free status
"10" ------------------------- Set Mode10 to Free status
Delete the data registered in Custom Mode1–10 and returns it to Free status.
This command operates the same way as storing to Mode1-10 in PC Adjust
Details
Menu.
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"000" [CR]
"101" [CR] --- When input is Video signal
--- When input is no signal
"000" [CR]
"101" [CR] --- When input is Video signal
--- When input is no signal
"000" [CR]
"101" [CR] --- When input is Video signal
--- When input is no signal
25/78