Bosch HGS246UC Use And Care Manual page 8

Light
Time
The Oven Control Panel
Cooking Mode
Clock/Timer
Temperature
Light
Time
Off
o c
F
Cooking Mode /
/
Temperature
Start
Off
Temperature
Indicator
Preheat or Probe
Temperature
Probe
Indicator
(HGS25 models)
Display Window Features
CLOCK= Showsthe time of day with a !2=houror 24=hourdock
option.
COOKING MODE oTouch pad to display cooking mode.
COOKING ORTINIED MODE - Showsthe number of hours and
minutes the oven will be "on." Cooking mode icon is also
displayed when cooking mode is selected.
CONTROL KNOB - Used to set the dock and timers, select
cooking mode and temperature. Turn clockwise to increase
and turn counterclockwise to decrease.
Warming
Drawer
Indicator
(HGS24and
HGS25models)
Start ControlKnob
TINIER - There are two timers= TIMER ! AND TIMER 2; Each
counts down the time in hours and minutes. With less than 60
minutes remaining, the timer also displays seconds.
WARMING
D_WER INDICATOR (HGS24andHGS25 models)o
icon displays when warming drawer is in use. indicates warming
drawer setting.
Other Indicators and Features
LIGHT - Touch pad to turn oven light on or off.
DOOR LOCK INDICATOR- Icon is displayed during the self=
clean mode when the door is locked. DO NOT attempt to open
the door until the lock symbol is no longer present.
OFF o Touch pad to turn off oven and! or warming drawer.
OVEN TENIPERATURE oShows the oven temperature selected.
PREHFJ_T o Displaystemperatureofoven during preheat mode.
Also displays internal temperature of meat when probe is in use
(HGS25 models).
PROBE INDICATOR (HGS25models) o Indicatesthe probe is
installed in oven. The internal temperature of the meat is
displayed in place of the preheat temperature.
START o Touch pad to complete an entry.
TE NIPEPJ_.TUREoTouch pad to select cooking temperature.
TINIE =Touch pad to set time of day and/or timer.
BEEP o Signals that more information must be entered or
confirms the receipt of an entry. A beep also signals the
end of a program or an oven error.
DEFAULT SETTINGS oThe cooking modes automatically
select the default temperature. These can be changed
when a different one is needed.
FLASHING SYNIBOL OR NUMBER- Signals an
incomplete setting and calls for another step or START to
be touched.
F NUNIBER CODES - These codes are displayed if there is
a problem with the range.
CONVECTION
FAN oThe convection fan operates during
any convection mode. When the oven is operating in the
convection mode, the fan wili turn off automatically when
the door is opened except when in the dehydrate mode.
The convection fan will also run during the preheat time
for specific modes and during the self-dean mode.
Page 5