Bosch HGS246UC Use And Care Manual page 21

Setting the Timer/s
1. Touch TIME andTIMER I wil! b e displayed.
2. Turn counterclockwise and TIMER 2 will be displayed,
Select TIMER i or 2, then push TIME. SET TIMER
I (2) appears in display'. Minutes flash.
Clearing the Timer/s
1. TouchTIMEonce, TIMER 1 flashes,
2. Turn knob to selectCLEAR TIMER 1(2),
3, Touch TIME.
4. If TIME pad is not touched, range will beep and display
will continue flashing.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii ¸iii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii ¸i i] i Z
3_
Turn knob to the rightto increase by 1 minute
increments or left to decreaseby 1 minute increments,
Continuetoturn knob until d esired minutesare
displayed.
If setting only minutes, press START, Otherwise, continue
to step 4.
4. Touch TIME again and the hours will flash.
When the specified t ime has elapsed, the control beeps,
TIMER i (2) END flashes in the display.
1. Touch TIME to return to main screen,
5. Turn knob to the rightto increase by i hour
increments or left t o decreaseby 1 hour increments
until d esired hours are displayed.
6. Touch TIME again,The TIMER is now set.
If TIME or START is not touched, display will beep
andtimer will flash.
Changing the limer/s
1, TouchTime, TIMER 1 willappearin display,SelecteitherT]:HER
lor2o
2. Push TIME, RESET TIMER i (2) appears in the
display. Minute digits flash.
3. Turn knob clockwise or counter-clockwise to change
minutes.
4. Touch TIME again and hour digits will flash.
5. Turn knob clockwise or counter-clockwise to change
hours.
6. Touch TIME and new time is set.
Page 18