Advertisement
Available languages
Available languages
@
To cancel
the Clock dispmay:
[f you do not want the time of day to dispiay:
Press and hoid the Cancei and CHockpads for three seconds.
The time of day wiii disappear from the dispiay
When the chock dispiay is cancelled, press the CHockpad to
brbfiy dispiay the time of day.
To restore
the Clock display:
Press and hoid the Cancei and CHock
pads for three seconds. The time of day
wiii reappear in the dispiay.
__
Clock
The timer can be set from one minute (0:01} up to 99 hours
and 59 minutes (99:59}.
The timer can be used independentiy of any other oven
activity. It can aiso be set whiie another oven function is
operating.
The Timer does not contro] the oven. it only controis a
beeper.
To set the Timer:
1. Press the Timer pad.
° 0:00 iights in the dispiay.
° The coion wiii flash+
2.
Timer
Press the A or V pad until the
correct time appears in the display.
° The colon will continue to flash.
A
3,
Press Timer pad again or wait four seconds.
° The colon continues flashing and the time begins
counting down.
° The last minute of the timer countdown wiii be displayed
as seconds.
4. At the end of the set time, one long beep wiii sound.
To cancel
the Timer:
1. Press and hoid the Timer pad for three seconds.
OR
2. Press the Timer pad and set the time to 0:00.
Locking the Control
and Oven Door
The touch pad controis and oven door can be Hockedfor
safety, cieaning, or to prevent unwanted use= They wiii not
function when Hocked.
If the oven is currently in use, the controls and door cannot be
locked.
The current time of day wiii remain in the display when the
controls are locked.
To lock:
Press and hold the Cancel and Cook &
Hold pads for three seconds. (Press
Cancel pad first.}
LOCK flashes in the display.
To untock:
HoHd
Press and hold the Cancel and Cook & Hold pads for three
seconds. (Press Cancel pad first.}
LOCK disappears from the display.
Fault
Codes
BAKE or LOCK may flash rapidly in the display to alert you if
there is an error or a problem. If BAKE or LOCK flash in the
display, press Cancel pad. If BAKE or LOCK continue to flash,
disconnect power to the appliance. Wait a few minutes, and
then reconnect power. If the flashing still continues, discon-
nect power to the appliance and call an authorized servicer.
8
Advertisement
