Entering A Password To Use The Projector - Epson BrightLink 436Wi Manual
Document
Hide thumbs
Also See for BrightLink 436Wi:
- Manual (13 pages) ,
- Product specifications (6 pages) ,
- Quick setup (4 pages)
Table of Contents
Advertisement
Entering a Password to Use the Projector
If a password is set up and a Power On Protect password is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
1. Hold down the Num button on the remote control while you enter the password using the numeric
buttons.
The password screen closes.
2. If the password is incorrect, the following may happen:
• You see a "wrong password" message and a prompt to try again. Enter the correct password to
proceed.
101
Advertisement
Table of Contents
