Installing Batteries In The Remote Control - Epson BrightLink 436Wi Manual
Document
Hide thumbs
Also See for BrightLink 436Wi:
- Manual (13 pages) ,
- Product specifications (6 pages) ,
- Quick setup (4 pages)
Table of Contents
Advertisement
2. Connect the USB cable to the projector's USB TypeA port.
3. Connect the other end of the cable to the document camera's USB Type B port.
Parent topic:
Projector Connections
Related references
Optional Equipment and Replacement Parts
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
1. Open the battery cover as shown.
42
Advertisement
Table of Contents
