Entering A Password To Use The Projector - Epson EB-PU1006W User Manual

If you do not see this menu, hold down the Freeze button on the remote control for about 5 seconds or
until the menu appears.
• To prevent unauthorized use of the projector, select Power On Protection, press
press Enter again, and press Esc.
• To prevent changes to the User's Logo screen or related display settings, select User's Logo
Protection, press
• To prevent changes to network settings, select Network Protection, press
Enter again, and press Esc.
• To prevent changes to the projector's time or schedule settings, select Schedule Protection, press
Enter, select On, press
• To prevent changes to the projector's Remote Camera Access settings in the Network menu, select
Remote Camera Access, press
Note: Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the
password required to use the projector.
Parent topic:

Entering a Password to Use the Projector

If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
Enter, select On, press
Enter again, and press Esc.
Enter, select On, press
Password Security Types
Enter again, and press Esc.
Enter again, and press Esc.
168
Enter, select On,
Enter, select On, press