Replacing The Lamp - Epson BrightLink 436Wi Manual
Document
Hide thumbs
Also See for BrightLink 436Wi:
- Manual (13 pages) ,
- Product specifications (6 pages) ,
- Quick setup (4 pages)
Table of Contents
Advertisement
Replace the lamp as soon as possible when the following occurs:
• The projected image gets darker or starts to deteriorate
• A message appears when you turn on the projector telling you to replace the lamp
• The projector's lamp light is flashing orange
Replacing the Lamp
Resetting the Lamp Timer
Parent topic:
Projector Maintenance
Related references
Optional Equipment and Replacement Parts
Projector Lamp Specifications
Projector Information Display - Info Menu
Replacing the Lamp
Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.
Warning: Let the lamp fully cool before replacing it to avoid injury.
You can replace the lamp while the projector is mounted to the ceiling, if necessary.
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
172
Advertisement
Table of Contents
