Solving Network Problems; Solutions When Network Alert E-Mails Are Not Received; Where To Get Help - Epson BrightLink 436Wi Manual

Solving Network Problems

Check the solutions in these sections if you have problems using the projector on a wired or wireless
network.

Solutions When Network Alert E-Mails are Not Received

Parent topic:
Solutions When Network Alert E-Mails are Not Received
If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's network Mail menu
or in the network software.
• Set the Standby Mode setting to Networked Standby so the network software can monitor the
projector in standby mode.
Parent topic:
Related concepts
Wired Network Projection
Wireless Network Projection
Related references
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu

Where to Get Help

If you need to contact Epson for technical support services, use the following support options.
Internet Support
Visit Epson's support website at
solutions to common problems with your projector. You can download utilities and documentation, get
FAQs and troubleshooting advice, or e-mail Epson with your questions.
Solving Problems
Solving Network Problems
www.epson.com/support (U.S.) or www.epson.ca/support
200
(Canada) for