Projection Distance - Epson BrightLink 436Wi Manual

Wall-mounted
Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an
angle.
If you project from the ceiling or wall, or from the rear, be sure to select the correct Projection option in
the projector's menu system.
Note: Interactivity is not available when using rear or rear ceiling projection.
Parent topic:

Projection Distance

The distance at which you place the projector from the screen determines the approximate size of the
image. The image size increases the farther the projector is from the screen, but can vary depending on
the zoom factor, aspect ratio, and other settings.
Refer to the tables in the Installation Guide to determine approximately how far to place the projector
from the screen based on the size of the projected image. (Conversion figures may have been rounded
up or down.) You can also use the projector Throw Distance Calculator at
(U.S.) or www.epson.ca/support
Parent topic:
Projector Placement
(Canada).
Projector Placement
29
www.epson.com/support