Understanding The Parts Of The Printer - Lexmark Pro715 Quick Reference Manual

About your printer
26
Extend and flip out the paper stop.
2
27
From the printer control panel, press
Notes:
•
The alignment page prints.
• Do not remove the page until printing is finished. The alignment page may take a while to print.
• Streaks on the alignment page are normal and not an indication of a problem.
•
The alignment page that prints may differ from the one shown.
•
Recycle the alignment page.
1
to print an alignment page.

Understanding the parts of the printer

1
2
11
10
Use the To
1 Scanner cover Access the scanner glass.
2 Scanner glass Scan, copy or fax photos and documents.
3 Automatic Document Scan, copy, or fax multiple‑page letter‑, legal‑, and A4‑size documents.
Feeder (ADF)
4 ADF paper guide Keep paper straight when feeding into the ADF.
5 ADF tray Load original documents into the ADF. This is recommended for scanning,
copying, or faxing multiple-page documents.
Note: Do not load postcards, photos, small items, or thin media (such
as magazine clippings) into the ADF. Place these items on the scanner
glass.
6 ADF output tray Hold documents as they exit from the ADF.
7 PictBridge and USB port Connect a PictBridge‑enabled digital camera or a flash drive to the
printer.
8 Printer control panel Operate the printer.
9 Paper tray Load paper.
10 Paper stop Catch the paper as it exits.
11 Paper exit tray Hold paper as it exits.
3
4
5
6
7
8
9
12