Assembly Handle Assembly; Brush/Nozzle Assembly - Hoover FloorMate SpinScrub Cleaner Manual

Ass mbl h ndl
Rotate bottom handle support (A)
up to the upright position until a
snap is felt.
Q lign control rod (B) on upper han-
dle (C) with slot in bottom handle
support (D).
O ush upper handle (C) all the way
down until you hear it snap in
place.
Install brushes and n°zz!e
To install brushes, place handle in
upright position. T_lt cleaner back so
that it rest_s on the floor.
Align post (A) on brush block with hole
(B) on bottom of cleaner. Turn brushes
slightly until post fits easily into hole.
"x
J
Continued -_
5