Craftsman 316.292640 Operator's Manual page 9

PROBLEM
Primer bulb wasn't pressed enough
Old or improperly mixed fuel
Plugged spark arrestor
The outside temperature is above 90 ° F
Old or improperly mixed fuel
Old or improperly mixed fuel
Cultivator tines bound with debris
Plugged spark arrestor
SOLUTION
Press primer bulb fully and slowly 10 times
Drain fuel tank and add fresh fuel mixture
Clean or replace spark arrestor
Pull the starter rope up to 10-15 times
Drain fuel tank and add fresh fuel mixture
Drain fuel tank and add fresh fuel mixture
Stop the unit and clean or remove any debris binding the tines
Clean or replace spark arrestor
Old or improperly mixed fuel
Air filter is plugged
Plugged spark arrestor
Drain fuel tank and add fresh fuel mixture
Replace or clean air filter
Clean or replace spark arrestor
9