LG 50PX4DR - 50 Plasma HDTV Owner's Manual page 9

Introduction
÷ This is a back panel of 50PY2DR, 60PY2DR series TVs.
Back Connection Panel
S-VIDEO mnput
is available to provide
better picture quality than the video
input.
VmDEO mnput
Connects the video signal from a
video device.
put
Connections are available for listen-
ing stereo sound from an external
device.
G=MNK
Connect an
IR controller
to this jack.
CaMeCARD
TM
Used for
CableCARD
TM
received Cable
Service
Provider=
RS-2320 mNPUT
(CONTROL/SER-
VmCE) PORT
Connect to the RS-
232C port on a PC.
IEEE1394 RGB/AUDIO
Connect iNPUT
DVHS or Connect the moni-
MicroMV to tot output from a
IEEE1394
Connector.
Remote Contro_ Port
Connect your wired
remote control here.
DVD/DTV mnput
(Component 1-2) S=Video
Connect a corn-
Input
ponent Connect S-
video/audio
PC to the appropri- device to these Video out from
ate input port. jacks, an S-VIDEO
device.
Antenna Input
Connect over-the-
air signals to this
Digital Audio (DVh Audio/Video InpUt
RDMml/DVI(VIDE Digital Visual Connect audio/video
O), HDMI 2 Interface/Comport output from an exter-
Connect a HDMI ent2) mnput/ nal device to these
signal to Digital Audio jacks.
HDMI1/DVI or Output
HDMI2= Or Connect digital
DVI(VIDEO) sig- audio from various
nal to HDMtl/DVI
types of equipment.
)oft with DVI to Note." In standby
HDMI cable, mode,
these ports will not
work.
Monitor Output
Connect a second
TV or Monitor=
CABLE Input
Connect cable signals to this
jack, either directly or through a
cable box=
Power Cord Socket
This TV operates on an AC power= The voltage is
indicated on the Specifications page= Never
to operate the TV on DC power=
Note:
TM - After removing the cover, you can insert the CableCARD or connect to the G-LINK jack.
Owner's Manual 9