LG 50PX4DR - 50 Plasma HDTV Owner's Manual page 77

Operation
- While recording, you can change channels or inputs, without disturbing the recording. And the screen being
recorded will be shown in the lower-right corner of the main screen.
1. After starting an Instant Record or Reserved Record, change the channel or input.
*You can check the screen being recorded in the lower-right corner the main screen (as shown below).
*Press the PIP button to cancel or show the screen being recorded.
*Press the SWAP button to return the screen being recorded in Watch & Record.
*When changing to the channel being recorded in Watch & Record, screen is changed to Instant Record state or
Reserved Record state.
screen being recorded
• Watch & Record Input
Digital Analog Video Front Video
Digital X 0 0 0
Analog 0 0 0 0
Video 0 0 0 0
Front Video 0 0 0 0
Comf:one{ltl 0 0 0 0
Compone_lt2 0 0 0 O
RGB-_ 0 0 0 0
HDMI1/DVl 0 0 0 0
HDMI2 0 0 0 0
Note: When digital broadcast is being recorded, another digital broadcast can not be tuned.
,_ - if you turn the power off on recording, this message is displayed as shown below.
- If you selects Yes, recording stops and then power is off.
And if you selects No, recording continues and then power is off.
Owner_Manual 77