LG 50PX4DR - 50 Plasma HDTV Owner's Manual page 36

Operation
1. First, connect power cord correctly. At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the 0!I,TV/VmDEO ®, OR (_. / _) button on the TV or press
the POWER, TV/VIDEO, TV INPUT, OH (A/T), Number (0 _ 9) button on the remote control.
2. Select the viewing source by using TV/VmDEO, TV iNPUT button on the remote control.
This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to
standby mode.
No
_es:
• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
,After turning on the TV, it wtil take up to a week for the TV Guide On Screen system to receive full
listings data.
• Illuminates orange in standby mode. When the TV is turned on, the indicator wtil blink green for 3-4
seconds before the picture is seen.
• When the TV is turned On, the TV Guide On Screen system is automatically displayed. The screen
may be slightly delayed if the TV was unplugged and then powered On.
36 Plasma TV