Table of Contents
Advertisement
Operation
In PIP mode, press the • / • / .4 / •
button to move the sub picture to a different location on the
screen.
Use the • / •
/ 4 / •
button to change main and sub picture sizes in Twin Picture mode.
i.e)
If screen is adjusted to the
maximal size, the large
screen is filled with entire
screen vertically as shown.
Use POP to search the programs of all the memorized
channels one-by-one
on the 3 PIP screen display,
(while the main picture source remains the current channel). The pictures of all the programmed channels
are searched with the 3 POP screens.
Notes:
•Run EZ Scan channel search before using POP mode.
•When Sub pictures are changed from the TV/DTV to CATV/CADTV
in POP mode, it may make a noise
from the Tuner switch.
1. Press the PIP button to activate the POP mode while in PIP mode.
• Channel
selection:
Use _1button to enlarge the selected channel being searched on the PIP
screen to shift it for viewing on the Main screen.
• PIP selection:
Use •/•
button to select one of 3 PIP screen pictures in POP mode.
• When watching TV/CATV on Main picture, TV/CATV or DTV/CADTV on Sub pictures are in chan-
nel scanning. However, when watching DTV/CADTV on Main picture, only TV/CATV on Sub pic-
ture is in channel scanning.
2. Press the EXIT button to cancel POP mode.
112
Plasma TV
Advertisement
Table of Contents
