Table of Contents
Advertisement
Operation
- Choose preset labels for your channels.
- If a channel label is provided on the signal from the broadcasting
station, the TV displays a short name for a channel -
even if you didn't preset a labe! for the channel.
1. Press the MENU button and then use _ / T button to select the SE'J_J'P menu.
2. Press the _ button and then use A / T button to select Chapel
L_bel.
3. Press the _- button. You will now see a screen filled with Labels and a preview screen.
4. Use the ON (A/T} button to select a channel to Label.
5. Use A / _' / _ / _ button to select the appropriate
label for the channel, then press ENTER button to set the Label to
the selected channel.
- If you press
ENTER
button, you will see the channel banner .....
- Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any
other devices that are connected to your TV.
1. Press the MENU button and then use A / _" button to select the $_TUP menu.
2. Press the _ button and then use A / _' button to select Main Input.
3. Press the _ button and then use A / T button to select the source: Antenna,
Cable, Video, Front Video, Component1,
Component2,
RGB-DTV
(or RGB-
PC), HDMI1/DVI,
HDMI2.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
1. Press the MENU button and then use A / T button to select the $_UP
menu.
2. Press the _ button and then use A / T button to select _put
_be:L
3. Press the _ button and then use ,A / T button to select the source: Video, Front
Video, Component1,
Component2,
RGB, HDMI1/DVl or HDMI2.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
Owner's Manual
4I
Advertisement
Table of Contents
