Table of Contents
Advertisement
Installation
How to Connect
Connect the audio and video cables from the external equip-
ment's output jacks to the TV input jacks, as shown in the
figure.
When connecting the TV to external equipment,
match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source with using the TV/VIDEO button on
the remote control. Note that this TV finds the connected
input sources automatically for Video !-2 and Component
!-
2. It is presumed that RGB, HDMI!/DVI
and HDMI2 sources
are connected.
2. Operate the corresponding
external equipment.
For connec-
tion instructions to operate the TV Guide On Screen system,
see page 29.
Camcorder
Video Game Set
or
DVD
HOW tO COnnect
1= Connect the DVD video outputs (Y, PB, PR) to the COMPONENT
(Y, PB, PR) INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.
2= If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs
to the AUDIO INPUT jacks on the TV, as shown in the figure.
Note: If your DVD player does not provide component
video output, use S-Video output.
HOW
tO USe'
1. Turn on the DVD player and then insert a DVD.
2. Use the TV/VIDEO button on the remote control to select Component
1 or Component
2. (If connected to S-VIDEO, select
the Video or Front Video external input source.)
3. Refer to the DVD player's manual for operating instructions.
Component
mnput ports
To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below.
[
Component
ports
on the TV
Video output ports
on DVD player
Notes:
• Di_talAudio
will not work for Component
1 input source.
Digital Audio operation has priority if Digital Audio and AUDlO L/R
are connected
at the same time.
Owner's Manual
2t
Advertisement
Table of Contents
