Table of Contents
Advertisement
Operation
- You can save the desired screen in the recorded program list after editing the recorded program.
1. At the point you wish to start, press the
button.
The progress bar will show the edited section as red.
It can be possible to search (4< or _*), and pause while editing the section.
2. When you wish to stop, press the
button.
Stop editing the section.
3. If you repeat from step 1,2, it can be possible to edit some programs.
4. If you press the
button to stop the recorded program playback, this message is displayed as shown below.
Save: Save contents of the edited section and finish the playback
of the recorded program.
Undo: Don't save contents of the edited section and finish the play
backof the recorded program.
Cancel:
The screen returns to playback.
Notes:
, it can be possible to play on the recording / reserved recording
, It can be possible to hear a noise from the hard-disk during playback of the recorded program.
The noise is irrelevant
the proficiency
and creditability of product, the noise occurred more than adequate is the same as good product.
. When saving the content of the editied section, delete the portion not selected.
When power fails during editing, ft can be possible for the program not to be ed/tied. You do press the STOP ( R ) but-
ton after checking the recording fist.
Editing the section can be possible to the maxium of I0 files.
Edits must be more than 10 seconds to be saved.
62
Plasma TV
Advertisement
Table of Contents
