LG 50PX4DR - 50 Plasma HDTV Owner's Manual page 28

Owners manual
Table of Contents

Advertisement

lnstatiation
How
to use
1. Connect the HDMil/DVl
Source Devices(DVD
Player or Set Top Box or PC) and the TV SET.
2. Turn on the display by pressing the POWER button on the TV SET and HDMI1/DVI
Source Devices remote control.
3. Select HDMI1/DVI
input source in Main input option on the SETUP menu.(Refer to R41)
4. Check the image on your TV SET. There may be noise associated
with the resolution, vertical pattern, contrast or brightness
in
HDMI1/DVI
Source Devices. if noise is present, change the HDMil/DVl
Source Devices to another resolution, change the
refresh rate or adiust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphics
card can not changed, change the PC graphics card or consult the manufacturer
of the PC graphics card.
Notes:
- Depending on the graphics card, DOS mode may not work if a HDMI1 to DV/Cable
is in use.
- Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently
imprinted on the
screen. Use the Orbiter feature on the ISM Method menu.
- When Soume Devices connected
with HDMI1/DW
Input, output PC Resolution(VGA,
SVGA, XGA), Position and Size may not fit
to Screen. As shown the picture below, press the ADJUST
button to adjust the screen Position of TV SET and contact an PC
graphics card service center.
- When Soume Devices connected
with HDMI1/DW
Input, output TV SET Resolution(480p,
720p, 1080/) and TV SET Display tit
EIA/CEA-861-B
Specification to Screen. If not, refer to the Manual of HDMI1/DW
Soume Devices or contact your service cen-
ter.
- In case HDMI1/DVI
Source Devices is not connected
Cable or poor cable connection,
"NO SIGNAL" OSD display in HDMI1/DVI
Input. In case that Video Resolution is not supported TV SET output in HDMI1/DW
Soume Devices, "INVALID FORMAT" OSD
display. Refer to the Manual of HDMI 1/DV! Source Devices or contact your service center.
PC mode
_n This Mode, the Supported
TV SET Resomution Specification
- 1920 x 1080 I @ 59.94Hz / 60Hz, 16:9
- 1280 x 720 P @ 59.94Hz / 80Hz, 18:9(preferred
format)
- 720 x 480 P @ 89.94Hz / 80Hz, 18:9
- 720 x 480 P @ 89.94Hz / 80Hz, 4:3
_n This Mode, the Supported
PC Resolution
Specification
- 840 x 480 @ 89.94Hz
-840 x 480 @ 72.80Hz
- 640 x 480 @ 78Hz
- 840 x 480 @ 88Hz
- 800 x 800 @ 58.25Hz
-800 x 800 @ 80.31Hz
- 800 x 800 @ 72.18Hz
- 800 x 800 @ 78Hz
- 800 x 800 @ 88.06Hz
-1024
x 788 @ 80Hz(preferred
format)
-1024
x 788 @ 70.08Hz
-1024
x 768 @ 78.02Hz
28
Plasma TV

Advertisement

Table of Contents
loading

This manual is also suitable for:

50py2dr60py2dr50px4dr50py2dr-ua60py2dr-ua50px4dr-ua

Table of Contents