GE JB900 Owner's Manual page 33

GEAppliances.com
le_ :::i_: Possible Causes What To Do
Ovenwill not self-clean
The oven telnperature is • _dlow the oven to cool to roolu telul)eratt/re and
too high to set a self-cleml reset the (ontrols.
operation.
Oven controls improperly set. • See the Using the self-cleaning oven section.
"Crackling " or This is the sound of the • This ix nornial.
"popping" sound
metal heating and cooling
during both the cooking and
cleaning functions.
Excessivesmoking Excessive soil. • Press the CLEAR/OFFpad. O pen the windows
to
during a clean cycle
rid tile room el smoke. _'ait until the LOCKED door
light goes off. Wipe up tile excess soil and reset tile
dean cycle.
Oven door will not Oven too hot. • Allow the oven to cool below locking temperature,
open after
a
and LOCKED or CLEAN no longer al)pea_ in the disl)la):
clean
cycle
Oven not clean after Oven controls not properly set. • See tile Using the self-cleaning oven section.
a clean cycle
Oven was heavily soiled.
• (3can
up hea\ T spillovers before starting tile clean
cycle. Heavily soiled ovens Inav need t() sell_clean
again or for a longer period of time.
"LOCKDOOR"flashes
The self-clean cycle has been • Close the oven door,
in the display
selected but the door is not
closed.
LOCKED DOORlight
The oven door is locked
• Press
tile
CLEAR/OEEpad.
A llow tile oven to cool,
is on when you want because the
temperature
tO cook
inside the oven has not
dropped below the
locking temperature.
"F-- and a number
or letter" flash
in the display
You have a function
error code,
• Disconnect all power to the range fl)r at least
30 seconds and then recolmect poweI: If the flmction
error code repeats, call for service.
33