GE JB900 Owner's Manual page 25

Camend cleaning of the range.
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is reengaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause inju_
How to Remove Protective Shipping Film and Packaging Tape
Careflllly grasp a corner ot the protective
shipping fihn with your finge_ and slowly
peel it fl'om the appliance sm_i_ce. Do not
use m V shaq) items to remove the fihn.
Remove all of the fihn before using the
appliance fiw the fi_t time,
To _lSS/lI'e no d_lIll_lge is done to
the
finish of tile product, tile safest way to
remove the adhesive ti'om packaging tape
on new appliances is an application oI a
household liquid dishwashing dem_gent.
Apply with a sott cloth and allow to soak.
NOTE."Theadhesivemust be removed from all
parts. It cannot be removed if it is baked on.
Control Knobs
The control knobs may be removed for easier
c/eambg.
Make sure tile knobs are in tile OFF
positions and pull them straight off tile
stems for cleaning.
Tile knobs can be cleaned in a
dishwasher or tile)' may also be washed
with soap and water; Make sm'e the inside
of the knobs are chT before replacing.
Replace tile knobs in tile OFFposifion to
ensm'e proper placement.
Oven Vent
Theoven vent is located behind the nght rear
surfaceunit.
This area could become hot during
oven rise.
It is noIl//_ll [()I" ste_lIll 1o COi//e ()/It of
tile vent and moistm'e may collect
tmderneath it when the oven is in use.
Thevent Is lYnportantfor proper air ckculation.
Neverblock this vent
25