Konica Minolta bizhub C754 User Manual page 140

2.8 Appendix: Manual installation process of the printer driver
0 To install a different printer driver in the computer where one has already been installed, you must un-
install the whole package of the currently installed printer driver.
1
Install the printer driver for this machine.
% For details, refer to page 2-5. The printer driver can be installed in any port.
2
Turn on the power of the machine while it is connected to the network.
3
In [Network and Sharing Center] on the computer, check that [Network Discovery] is enabled.
4
Open the [Network] window.
% In Windows 7/Server 2008 R2, open [Computer] and click [Network].
If [Network] is not displayed, click the [Network and Internet] category on [Control Panel], then click
[View network computers and devices].
% In Windows Vista/Server 2008, open the Start menu, and click [Network].
Connected computers and devices are detected.
5
Select the device name of the machine, then click [Install] on the toolbar.
% To check the device name, select [Utility] - [Administrator Settings] - [Network Settings] - [DPWS
Settings] - [DPWS Common Settings] on this machine.
The printer driver for this machine is detected and the machine is ready to print.
6
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] or [Devices and Printers] window.
d
Reference
If the printer driver is not correctly installed, the driver must be updated using [Update Driver...]. For details,
refer to page 2-130.
The procedure for installing the printer driver by specifying the IP address is as follows:
In Windows Vista/Server 2008, you can add a Web service device using the addition function of the printer
after connecting this machine.
0 In Windows 7/Server 2008 R2, the following installation procedure cannot be used. Use the installation
procedure described in the previous section.
0 Administrator privileges are required to perform this task.
0 To install a different printer driver in the computer where one has already been installed, you must un-
install the whole package of the currently installed printer driver.
1
Turn on the power of the machine while it is connected to the network.
2
In [Network and Sharing Center] on the computer, check that [Network Discovery] is enabled.
3
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
4
From the Start menu, click [Control Panel].
5
Click [Printers] under [Hardware and Sound].
% When [Control Panel] is displayed in Classic View, double-click [Printers].
The [Printers] window appears.
6
Click [Add a printer].
bizhub C754/C654
2
2-127