Konica Minolta bizhub C754 User Manual page 125

2.8 Appendix: Manual installation process of the printer driver
5
Click [Add a local printer].
The [Choose a printer port] dialog box appears.
6
Click [Create a new port:], then select [Standard TCP/IP Port].
7
Click [Next].
8
Select [TCP/IP Device], then enter the IP address.
9
Click [Next].
% If the [Additional Port Information Required] dialog box appears, go to Step 10.
% If the [Install the printer driver] dialog box appears, go to Step 13.
10
Select [Custom], and then click [Settings...].
11
Change the settings according to the port, and then click [OK].
% For an LPR connection, select the [LPR] check box, then enter "Print" in [Queue Name:]. You must
discriminate between upper and lower case letters when entering it.
% For Port 9100 connection, select the [Raw] check box, and then enter a RAW port number (initial
setting: [9100]) in [Port Number:].
% If both LPR and Port 9100 are enabled on this machine, the printer driver is connected to this ma-
chine using LPR.
12
Click [Next].
The [Install the printer driver] dialog box appears.
13
Click [Have Disk...].
14
Click [Browse...].
15
Select the folder on the CD-ROM containing the desired printer driver, then click [Open].
% Select the folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers: PCL driver, PS driver, and XPS driver
16
Click [OK].
The [Printers] list appears.
bizhub C754/C654
2
2-112