Available Operations In The [Layout] Tab - Konica Minolta bizhub C754 User Manual

2.6 Setting items in the printer driver
Settings
[Paper Settings for Each
Tray...]
Tips
- [12 e 18] in [Paper Size] is equivalent to 304.8 e 457.2 mm that is slightly larger than A3.
- In [Original Size], you can select A0, A1, A2, B1, B2, or B3. However, the original is reduced to the size
specified in [Paper Size]. In this case, you cannot select [Same as Original Size] in [Paper Size].
Likewise, the large size registered in Print Server Properties is also reduced to the size specified in [Pa-
per Size]. The paper set in Print Server Properties is available when the [Display paper set in Print Server
Properties] check box is selected in the [Settings] tab.
- When you want to print on the entire paper of the standard size, select "W" for each standard size in
[Original Size]. The original is printed at the center of paper larger than the original.
For example, if you want to center and print 8-1/2 e 11 size data on 11 e 17 sized paper, create data
with the "8-1/2 e 11W" size, and then, using the printer driver, set [Original Size] to [8-1/2 e 11W] and
specify the paper tray to be used as [Paper Tray].
On this machine, load 11 e 17 size paper into the tray to use, and check the paper size as follows.
Select the tray in [Paper] for the copy mode. Select [Change Tray Settings] - [Wide Paper], specify [8-
1/2 e 11W] and make sure that the [Paper Size] is set to [Auto Detect] and 11 e 17 is displayed.
If you have loaded the 12-1/4 e 18 papers, you must set the [Paper Size] to [12-1/4 e 18].
To print on custom sized paper, use the Bypass Tray. In [Change Tray Settings] - [Wide Paper], select
[8-1/2 e 11W], and enter the paper size to use in [Change Size].
- In [Paper Type], specify [Side2] when printing on the back side of paper.
- In [Paper Type], [User] specifies the paper type registered in this machine.
- If you have registered the custom papers in [Set Paper Name by User...] of [Configure] tab, you can se-
lect the registered custom papers from the [Paper Type] list.
2.6.7

Available operations in the [Layout] tab

In the [Layout] tab, you can configure layout settings for printing. You can combine pages or adjust print po-
sitions.
bizhub C754/C654
Description
Specify the type of printing paper for each tray. When you specify anything
other than [Auto] in [Paper Tray], the paper type information specified here
is applied.
Ensure that the settings correspond correctly to the paper that has been
loaded into the paper trays of this machine. Use this setting when you can-
not change the settings in the [Configure] tab of the [Properties] window
because you do not have the administrator privileges.
Select the tray in [Paper Type Settings]. Then, in [Paper Type], specify the
type of the paper to be loaded in the selected tray. Clicking [Reflect Device
Status] reflects the settings.
2
2-97