[Book Original] - Konica Minolta bizhub C654 User Manual

[Book Original]

To display: [Copy] - [Application] - [No. of Originals] - [Book Original]
You can copy two-page spreads such as books and catalogs separately into the left and right pages, or copy
as one page.
Place a book or catalog on the Original Glass; you do not need to close the ADF to scan it.
Settings
[ON]/[OFF]
[Output Method]
[Non-Image Area Erase]
[Centering]
[Binding Position]
[Frame Erase]
bizhub C754/C654
Description
Select [ON] to specify Book Original.
Select the copy method of two-page spreads.
• [Book Spread]: Copy a two-page spread as one page.
• [Separation]: Copy the right and left pages of two-page spreads sepa-
rately in the order of the page numbers.
• [Front Cover]: Copy the front cover and two-page spreads according to
the page order of the original (scan in the order of front cover and two-
page spreads).
• [Front & Back Covers]: Copy the front and back covers and two-page
spreads according to the page order of the original (scan in the order
of front cover, back cover, and two-page spreads).
If you select Book Original, this item is set automatically.
When making copies with the ADF open and the original placed on the
Original Glass, the machine detects the outline of the original and erases
the area outside the original.
Cancel the setting if necessary.
If you select Book Original, this item is set automatically.
The original image is copied at the center of the page without enlarging it.
Cancel the setting if necessary.
If [Separation], [Front Cover] or [Front & Back Covers] is selected for [Out-
put Method], select the spreading direction of the original to be scanned.
Select [Left Bind] for two-page spreads of left binding, and [Right Bind] for
two-page spreads of right binding.
Note that if the binding position is incorrectly specified, the page order of
the two-page spread is reversed between the left- and right-hand pages.
Erases the shadow of the surrounding that is created when the original
cover cannot be closed properly due to the thickness of the original.
You can erase the four sides of the original to the same width. Also, you
can erase the four sides of the original to different widths.
• [Frame]: Select this option to erase the four sides of the original to the
same width. In [Erase Amount], tap [+]/[-] for the inch area, or tap [+]/[-
] or press the Keypad for the centimeter area to specify the width of the
area to be erased.
• [Individual]: Select this option to erase the four sides of the original to
different widths. Select a side ([Top], [Bottom], [Left] or [Right]) and
specify the width of the area in [Erase Amount] by tapping [+]/[-] for an
inch area and by tapping [+]/[-] or pressing the Keypad for the centim-
eter area. Likewise, specify the width for all the other sides one by one.
If you do not want to erase the side, cancel the setting for [Erase].
15
15-12