[Output Settings]; [Output Tray Settings]; [Shift Output Each Job]; [Date/Time Settings] - Konica Minolta bizhub C654 User Manual

Settings
[Awake from Power Save
Mode by Touching Control
Panel]

[Output Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Output Settings]
Configure the output settings of this machine, such as the print setting of print and received fax data, and
changing of primary output tray.
Settings
[Print/Fax Output Settings]

[Output Tray Settings]

[Shift Output Each Job]

[Output Tray Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Output Settings] - [Output Tray Settings]
Select the tray to which paper is ejected first in Copy, Print, Fax, or Print Report.
Different default values are available for different options installed on this machine.
Tips
- This item is available when the optional Finisher is installed.
[Shift Output Each Job]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Output Settings] - [Shift Output Each Job]
Specify whether to shift paper for each job before ejection.
[Yes] is specified by default.
Tips
- This item is available when the optional Finisher is installed.

[Date/Time Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Date/Time Settings]
Specify the current date and time and time zone of this machine.
Settings
[Current Time]
[Time Zone]
bizhub C754/C654
Description
Specify whether to return to the normal mode when you touch the Touch
Panel in the Power Save mode.
If you select [OFF], the machine returns to the normal mode only when the
Power key is pressed.
[ON] is specified by default.
Description
Select when to start printing received print/fax data.
Select the tray to which paper is ejected first in Copy, Print, Fax, or Print
Report.
This item is available when the optional Finisher is installed.
Specify whether to shift paper for each job before ejection.
This item is available when the optional Finisher is installed.
Description
Enter the current date and time.
• [Set Date]: Automatically adjust the date and time of this machine using
an NTP server. To perform time adjustment, set the time difference be-
tween UTC and your local time in [Time Zone] and tap [Set Date]. This
button is available if an NTP server has been registered by selecting
[Administrator Settings] - [Network Settings] - [Detail Settings] - [Time
Adjustment Setting].
To automatically adjust the time of this machine using an NTP server, set
the time difference between UTC and your local area in multiples of 30 min-
utes.
17
17-5