Konica Minolta bizhub C452 Function Manual page 32

3.1 Control panel
No. Name
9 [Stop]
10 [Proof Copy]
11 [Start]
12 Data indicator
13 [C] (Clear)
14 Keypad
15 [Guidance]
16 [Enlarge Display]
17 [Accessibility]
18 [Access]
19 [Brightness] dial
20 [User Box]
21 [Fax/Scan]
22 [Copy]
7 CAUTION
- Do not apply extreme pressure to the touch panel, otherwise the touch panel may be scratched or
damaged. Never push down on the touch panel with force, and never use a hard or pointed object to
make a selection in the touch panel.
bizhub C652/C652DS/C552/C552DS/C452
Description
Pressing the [Stop] key during scanning temporarily stops the scan op-
eration.
Press this key to print a single proof copy to be checked before printing
a large number of copies. You can check the finishing state on the touch
panel by pressing this key before scanning or copying.
• This key is not available when saving documents by pressing the [Us-
er Box] key.
• To check the preview image when saving in a User Box, press the
[Fax/Scan] key. For checking preview procedure, refer to the
"User's Guide [Network Scan/Fax/Network Fax Operations]".
Press this key to start scanning. When this machine is ready to begin a
scan operation, the indicator on the [Start] key lights up in blue. If the in-
dicator on the [Start] key lights up in orange, scan operation cannot be
started. Press this key to restart a stopped job.
Flashes in blue while a print job is being received. Lights up in blue when
data is being printed.
Press this key to erase a value (such as the number of copies, a zoom
ratio, or a size) entered using the keypad.
Use this keypad to enter the number of copies to be produced, the zoom
ratio, and the various other settings.
Press this key to display the Guidance screen. From this screen, you can
view descriptions of the various functions and details of operations.
Press this key to enter Enlarge Display mode. If you use PageScope Au-
thentication Manager for authentication, the Enlarge Display screen is
not available.
Press this key to display the screen for configuring settings for user ac-
cessibility functions.
If user authentication or account track settings have been applied, press
this key after entering the user name and password (for user authentica-
tion) or the account name and password (for account track) in order to
use this machine. Press this key to log off from the machine as well.
Use this dial to adjust the brightness of the touch panel.
Press this key to enter User Box mode. While the machine is in User Box
mode, the indicator on the [User Box] key lights up in green.
Press this key to enter Fax/Scan mode. While the machine is in Fax/Scan
mode, the indicator on the [Fax/Scan] key lights up in green. For details
on the fax and scan functions, refer to the "User's Guide [Network
Scan/Fax/Network Fax Operations]".
Press this key to enter Copy mode. (The machine is in Copy mode in de-
fault. )While the machine is in Copy mode, the indicator on the [Copy] key
lights up in green. For details, refer to the "User's Guide [Copy Opera-
tions]".
3
3-3