Control Panel - Konica Minolta bizhub C452 Function Manual

3.1

Control panel

3 Control Panel/Liquid Crystal Display
3.1 Control panel
Use the control panel for User Box mode operation. The following describes the buttons and switches in the
control panel.
No. Name
1 Touch panel
2 Power indicator
3 [Sub power switch]
4 [Power Save]
5 [Mode Memory]
6 [Utility/Counter]
7 [Reset]
8 [Interrupt]
bizhub C652/C652DS/C552/C552DS/C452
22
21
20
19
18
17
16
15
Description
Various screens and messages are displayed. Configure the various set-
tings by directly touching the panel.
Lights up in blue when the machine is turned on with the main power
switch.
Press this switch to turn on/off machine operations, including copying,
printing and scanning. When turned off, the machine enters an energy
conserving mode.
Press this key to enter Power Save mode. While the machine is in Power
Save mode, the indicator on the [Power Save] key lights up in green and
the touch panel goes off. To exit from Power Save mode, press the [Pow-
er Save] key again.
Press this key to register (store) the desired copy/scan settings as a pro-
gram or to recall a registered copy/scan program.
Press this key to display the Utility screen and the Meter Count screen.
Press this key to clear all settings (except programmed settings) entered
using the control panel and touch panel.
Press this key to enter Interrupt mode. While the machine is in Interrupt
mode, the indicator on the [Interrupt] key lights up in green and the mes-
sage "Now in Interrupt mode." appears on the touch panel. To cancel In-
terrupt mode, press the [Interrupt] key again.
1
14 13 12 11 10
3
2
3
4
5
6
7
8
9
3-2