Image Panel
5.3.2
Operation flow
This section describes the operation flow from scanning documents until sending them, by operating the
Image Panel in the order of "scanning documents", "editing" and "specifying the destination".
Note
It is also possible to specify the destination first, and then scan documents.
Scan the document in the Data Source area.
•
To scan an original, position the original and then touch [Scan]. Specify the scan settings as required, and then
start scanning. For details, refer to
•
To use a document saved in a user box, select a user box from [User Box List], and select a document to be loaded.
For details, refer to
•
To use a document saved in an external memory, select the Media tab in the User Box List screen, and then select
a document to be loaded. For details, refer to
Select [Scan]
Edit the scanned document in the Edit tool area as necessary.
For details, refer to
Specify the destination of scanned documents in the Data destination area.
•
To print a document, touch [Print]. For details, refer to
•
To send a document, select the destination from [Destination List]. For details, refer to
page
5-10.
•
To save in an external memory, touch [Media] in the Destination List screen. For details, refer to
memory" on page
Select [Print]
Advanced Function
"Scan" on page
"Load from user box" on page
"Edit" on page
5-8.
5-11.
5-6.
5-7.
"Load from external memory" on page
Select [User Box List]
"Print" on page
5-9.
Select [Destination List]
5
5-7.
"Specify a recipient" on
"Save in external
5-5