Configuration Menu Group Or Diagnostic Menu Group - Lexmark E320 - Printer - B/W Service Manual

4500–E220/E321/E323

Configuration menu group or diagnostic menu group

Correct entry of either mode is indicated with the four top lights on.
Press and hold Continue (about 4 seconds) for the printer to
produce a page similar to the ones on
depending on which mode is entered.
Note: For information on how to enter the configuration or
diagnostic modes, see
(E220/E321/E323)" on page
Moving around the menu
"Printer settings configuration" on page 3-38
diagnostics" on page
by following step 4 on
designated by the non–indented items listed along the left edge of
the page. (Bottom as printed from printer.) These items are also un–
shaded.
•
Press and release Cancel to move sequentially from one menu
item to another.
•
Press and hold Cancel to jump to home state (top four lights
on).
•
Press and release Continue to move through the menu settings
(indicated by Error and Press Continue lights).
This action rotates only through the possible settings of the
selected menu item.
3-36
Service Manual
"Using the special function menu
2-106.
3-39, are similar to the instructions printed
page 2-106. These menu items are
page 3-38 and
and "Printer
page 3-39,