4500–E320/E322
Carriage return line feed/line feed carriage return
(CRLF/LFCR)
This function controls whether or not the printer automatically
performs a carriage return after a line feed control command and
whether or not the printer automatically performs a line feed after a
carriage return control command.
Perform the following steps to change the CRLF/LFCR setting:
1. Enter the configuration mode. See
page 3-14
2. Perform a double button press four times. This moves to the
CRLF/LFCR item on the configuration menu. The
CRLF/LFCR (Error) light comes on solid.
3. The current CRLF/LFCR setting is indicated by the off/on/auto
(Press Button) light.
•
When the light is off, auto CR after LF is off and auto LF after
CR is off.
•
When the light is on, auto CR after LF is on and auto LF after
CR is off.
•
When the light is blinking, auto CR after LF is off and auto LF
after CR is on.
4. Perform a brief button press to select the CRLF/LFCR setting.
5. Perform a long button press. All lights blink once, indicating the
setting is saved.
6. Exit the configuration mode by turning the printer power off.
3-30
Service Manual
for more information.
"Configuration mode" on