Printer operation
Paper is held in a 150 page tray where it is picked by a center–fed D
shape pick roller. The paper follows an L shape path as it moves
through the printer. Images are created with toner on an optical
photoconductor (OPC) drum within the toner cartridge. A transfer
roller then draws the toner off the OPC drum onto the paper. Once
the toner is affixed to the paper by the fuser, the paper exits either
the top or front of the printer.
Printer dimensions and clearance
The following table contains the dimensions for each printer model.
This does not include packaging but does include the print cartridge
that ships with the printer.
Physical dimensions
Height
Width
Depth
Operating clearance
Top
Left and right sides
Front
Rear
Note: Do not enclose printer on all sides without providing
ventilation.
E320/E322/E322n
221 mm (8.7 inches)
380 mm (15.0 inches)
368 mm (14.5 inches)
203 mm (8 inches)
305 mm (12 inches)
152 mm (6 inches)
None required except for paper
ejection.
51 mm (2 inches)
E220/E321/
E323/E323n)
221 mm (8.7 inches)
391 mm (15.4 inches)
368 mm (14.2 inches)
General information
4500
1-5