Unsupported flash option
Meaning
An error occurs at power-on.
Action
Power off the printer and remove the unsupported option
Service codes
All service errors are indicated by all lights flashing as the primary notification or code. The secondary light
pattern indicates an area or function which has the error. Tertiary codes (shown on the following pages) indicate
specific device errors. When all lights flash, double-click
see the tertiary code. Double-click
In the following example:
•
The primary light pattern indicates a service error (all flashing). Double-click
•
The secondary light pattern indicates a fuser, toner sensor, or fan error. Double-click
information.
•
The tertiary light pattern indicates the fan has stalled. Double-click
pattern will appear.
Note:
•
The printer cannot directly determine that a fan has failed, but can sense the higher temperature at the
fuser or printhead.
•
If data is sent to the printer and all lights flash simultaneously, and double-clicking
secondary code, there may be a code problem. Contact the next level of support.
to see the secondary code. Double-click
a third time to return to the primary light pattern.
4512-220, -230
for more information.
for more
again and the original primary light
does not produce a
Diagnostic information
again to
2-23