Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa Service Manual page 124

4512-220, -230
Manual feed solenoids
1.
Remove the duplex unit. See
2.
Extract the solenoid cable to a point close to the left side as possible.
3.
Remove the main motor drive. See
4.
Remove the auto comp clutch. See
5.
Remove the three screws (A).
6.
Remove the manual feed solenoids.
4-32
Lexmark™ E250d and E250dn
"Duplex removal" on page
"Main motor drive removal" on page
"Auto comp clutch removal" on page
4-18.
4-28.
4-10.