Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa Service Manual page 117

Link developer drive and access door removal
1.
Remove the main motor drive. See
2.
Remove the coupling assembly. See
3.
Disconnect the front access door from its hinges. See
Note: The cover does not need to be electrically disconnected.
4.
5.
Disconnect the link and door.
6.
Remove the developer link.
"Main motor drive removal" on page
"Developer drive coupling assembly removal" on page
"Front access cover removal" on page
4512-220, -230
4-28.
4-16.
4-2.
4-25
Repair information