Types Of Print Media - Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa Service Manual

4512-220, -230

Types of print media

Ensure trays are properly loaded. Never mix media types within a tray.
Source Sizes
Input tray 1 A4, A5, A6³, JIS B5,
letter, legal, executive,
(250-sheet tray)
folio, statement
2nd Drawer option A4, letter, legal, A5, JIS
B5, executive, folio,
(550-sheet only)
statement
7
Manual feed input A4, A5, A6³, JIS B5,
letter, legal, executive,
folio, statement
Envelopes
monarch (7 3/4), 9, 10,
C5, B5, DL
Minimum feed size: 76 X
127mm
Universal (max) paper:
216 X 357mm (legal size)
¹ Single sided paper labels are supported for the occasional use of less than 20 pages per month. They must exit through
the rear door. Labels such as vinyl labels, pharmacy labels or dual-sided labels are not supported.
² For 20 lb print material, unless otherwise noted.
³ A6 long grain media supported/short grain A6 not supported
4
Card stock up to 90# index. Designed to exit rear door. Short grain is recommended.
5
20 lb envelopes are recommended
Wrinkling may also occur on the front side, but away from address or return address areas. Slight wrinkling (nit in address
areas) is permitted on 24# envelopes. Use envelopes that lay flat when individually placed on a table face-down. The
distance of any edge or corner from the table should be less than 3 mm.
6
This refers to paper only. Treeing may occur on 16# paper.
7
Input using manual feeder is reduced to 1/2 speed
1-6
Lexmark™ E250d and E250dn
Types
Paper, labels¹,
transparencies
Paper, labels¹,
transparencies
Paper, labels¹,
transparencies, card stock,
envelopes
5
:
Weight
60—90 g/m
(16—24 lb)
60—90 g/m
(16—24 lb)
60—163 g/m
4
(16—43 lb)
5
Input capacity
6
(sheets)²
2
250 paper
50 labels¹
50 transparencies
2
550 paper (20 lb)
50 labels¹
50 transparencies
2
1 sheet (all medias)