Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa Service Manual page 126

4512-220, -230
5.
Rotate the link, and turn it to separate it from the plastic shaft (C). Be careful to not damage the adjacent
gear.
6.
Unsnap the shaft from its pivot, which is attached to the back of the LVPS/HVPS shield (D).
7.
Align the link end of the shaft with the opening in the side frame, and remove the shaft and spring anchor
(E).
4-34
Lexmark™ E250d and E250dn