Table of Contents
Advertisement
2. While touching the leftmost switch (
the monitor.
3. Select "Grayscale Warning" in "Administrator Settings", then select
4. Use
or
5. Select "Apply" and then
4.11 Viewing the Monitor Information
View information related to the input signals that are currently displayed and the monitor.
1. Select "Information" from the Setting menu, then select
Input signal information, model name, serial number, firmware version, and usage time
are displayed.
The asset tag number is only displayed when it has been set using RadiCS / RadiCS
LE.
Example:
Attention
• The usage time may not be "0" at the time of your purchase because inspections and other
processes had been carried out on the monitor before it was shipped from the factory.
4.12 Resetting to Defaults
There are two different reset functions: One that only resets the color adjustments to default
settings, and the other that resets all settings to defaults.
Attention
• The previous settings cannot be recovered after they were reset to defaults.
Note
• For details on default settings, see
4.12.1 Resetting the color adjustment value
Only the color adjustment value for the currently selected mode is reset to the default
setting.
1. Select "CAL Switch Mode" from the Setting menu, then select
2. Select "Reset" and then
3. Select "OK" and then
The color adjustment value reverts to the default setting.
to select either "On" or "Off" and then select
.
Main Default Settings
.
.
Configuring Monitor Settings | 4
), touch
for more than two seconds to turn on
.
[} 25].
.
.
.
17
Advertisement
Table of Contents
