Set Up Dhcp Reservation; Set Up Ipv6 On Your Router - TRENDnet AC1750 User Manual

TRENDnet User's Guide

Set up DHCP reservation

Network > LAN Setting
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
"Virtual Server" on page 35) or special applications (also called port triggering, see
"Special Applications" on page 36).
1. Log into your router management page (see
on page 26).
2. Click on Network, and click on LAN Setting.
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your router management page"
3. Review the DHCP reservation settings. Click Apply to save settings.
• Hostname: Enter a name of the device you will assign the DHCP reservation rule.
• MAC Address: Enter the MAC (Media Access Control) address of the computer or
network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)
• IP Address: Enter the IP address to assign to the reservation. (e.g.
192.168.10.101)
• Enable: Select enable to enable the setting
Note: You can also apply DHCP reservation to your guest network.

Set up IPv6 on your router

Network > IPv6 Setting
Your router support IPv6 protocol. Which is the latest Internet Protocol standards.
1. Log into your router management page (see
on page 26).
TEW-812DRU
"Access your router management page"
31