Using Hdtv Formats - Nvidia VCQFX550PCIEPB - Quadro FX 550 User Manual

Chapter 6
Configuring HDTV
Outputs" on page
available from the TV display icons as well as from the TV Settings screen.

Using HDTV Formats

Note: The following procedure can be used for nView Single display, Clone, or
Dualview mode.
1 After installing the NVIDIA Release 90 graphics driver, right click on your
Windows desktop.
2 If you have an HDTV connected in nView single display mode, then select the TV
option. If you have dual displays connected, then select the NVIDIA Display
option and then select the TV display option.
The NVIDIA display control panel appears.
3 Select nView Display Settings from the NVIDIA display menu to display the
associated page.
Either a single or two display icons appear.
4 If you are in single display mode but have multiple displays connection, you can
click the nView display settings list and select either Dualview or Clone mode.
5 If you are using an HDTV with a component connection, right click on the HDTV
display image and select the Select TV format option to quickly see the HDTV
formats
If you are using an HDTV with a DVI connection, when you right click on the HDTV
display image, the "Select TV format" option will appear only if the "Treat Digital
Display as HDTV" option is selected (checked), as shown in
checked, follow these steps:
a Select the Treat Digital Display as HDTV option and be sure to click Apply.
b Then right click on the HDTV display image again.
Notice that the "Treat Digital Display as HDTV" option is now checked and
you can click the Select TV format option to quickly see the HDTV formats
(Figure
c Proceed to step 6.
88
81) will be available in the nView Display Settings context menu
(Figure 6.2). Proceed to step 5.
6.3).
Figure 6.3. If it is not
User's Guide