Chapter 7
Configuring Key ForceWare Graphics Driver Features
Figure 7.35
The SLI connector is required only for SLI Frame Rendering.
6 If your graphics cards have an auxiliary power connector, connect them to the
power supply using the supplied power connector cables.
7 Replace the system's cover and reconnect your display(s) to the SLI technology-
capable graphics card installed in the x16 expansion slot.
8 Plug the power cable back into the system.
Installing the Display Driver
Follow the steps listed below to install your driver software:
1 Turn on your computer and log into Windows.
2 Cancel the Windows "Found New Hardware Wizard" program.
This message should appear twice – one for each graphics card).
3 Run "setup.exe" in the SLI driver you saved to your desktop.
4 Follow the Next prompts to proceed with driver installation.
5 Once the software has been installed, choose Yes, I want to restart my computer
now and select Finish to restart your computer.
158
Connecting Two Graphics Cards with an SLI Bridge Connector
User's Guide