Figure 4.6 Nview Display Pair Options - Nvidia VCQFX550PCIEPB - Quadro FX 550 User Manual

• One RGB display and one analog flat panel (with second RAMDAC)
• One analog flat panel and one TV
Note: Actual combinations supported on a given graphics card will vary.
Setting up a multi-display graphics card involves installing the graphics card on a
computer, connecting the displays to your computer, and installing the current
version of the NVIDIA ForceWare graphics display driver. After restarting your
computer, the multiple display modes of the graphics cards installed are fully
functional.
When using any nView multi-display mode, you can easily switch between the
displays by following these steps:
1 Open the nView Display Settings page.
2 Click the Display pairs list and click the paired display combination you want.
For example if you have an analog display, a digital display, and a TV connected
to your computer, your choices are as listed below and shown in
Figure 4.6
.
nView display pair options
•
Analog display + digital display
•
Digital display + analog display
NVIDIA Corporation
nView Display Pair Options
Using nView Multi-Display Settings
Figure
Chapter 4
4.6.
49