Table of Contents
Advertisement
Chapter 5
Configuring Displays
Video Output Format
Click the Video output format connection list to specify the type of video connector,
based on the output signal format supported by your regular television or HDTV, if
you have one connected. For details on configuring an HDTV, see
HDTV" on page
The default setting is Auto-select
If you have the proper connector cable, S-Video Out generally provides a higher
quality output than Composite Video Out.
If you are not sure about the type of video connector you should specify, choose
Auto-select.
Device Adjustments — TV Output
You can customize your TV display settings from the TV Output page shown in
Figure
5.5.
Note: Availability of settings on your TV Output page can vary from those shown in
Figure 5.5
the "external" TV encoder on the NVIDIA GPU-based graphics card you are
using.
Screen Positioning
Repositioning the TV screen — To reposition the TV screen (desktop), click any of
the long arrow buttons displayed on the outer top, bottom, left, and right edges of the
TV display icon, as shown in the TV Output page in
Note: If the TV picture becomes scrambled or is blank due to over-adjustment,
simply wait 10 seconds; the picture will automatically return to its default
position. You can then begin your adjustments again. Once you have
positioned the desktop where you want it, click OK or Apply to save the
settings before the 10 second interval has elapsed.
76
81.
(Figure
and depend on the "Internal" TV encoder on your NVIDIA GPU or
5.4).
Figure
5.5.
"Configuring
User's Guide
Advertisement
Table of Contents
Troubleshooting
