Switching Between Nview Dualview And Span/Clone Modes - Windows 2000; Enabling Nview Multiview Mode - Only For Nvidia; Quadro Nvs-Based Graphics Cards - Nvidia VCQFX550PCIEPB - Quadro FX 550 User Manual

Chapter 4
Using nView Multi-Display Settings
Switching Between nView Dualview and Span/Clone
Modes — Windows 2000
Note: Under Windows 2000, switching between nView Span/Clone and Dualview
modes requires restarting your computer. (Under certain configurations,
switching between Single Display mode and Dualview/Span/Clone may also
require restarting your computer.)
1 From your Windows 2000 desktop, right click to view the Windows desktop
menu, then click Properties > Settings > Advanced and then the NVIDIA GPU tab.
2 Click nView Display Settings from the NVIDIA menu.
3 From the nView Modes list, select Clone, Horizontal Span, or Vertical Span
mode.
Note: If you just switched to Clone, Horizontal Span, Vertical Span, or, under
4 When you have returned to your desktop, go to the nView Display Settings page
and select Clone, Horizontal Span, or Vertical Span mode from the nView Modes
list.
Note: To switch back to Dualview mode, you will need to restart your computer,
Enabling nView Multiview Mode —

Quadro NVS-based Graphics Cards

Note: nView Multiview mode is a custom mode that is only available when using the
NVIDIA Quadro NVS GPU-based series of graphics cards.
The NVIDIA Quadro NVS is a series of multi-display graphics cards for professionals
in the financial and non-linear editing (NLE) markets.
For further details on using this mode, see the NVIDIA Application Note titled
"Using nView MultiView Modes with NVIDIA Quadro NVS-based Graphics Cards"
66
certain circumstances, Single Display mode from Dualview, you'll need to
follow the prompts to restart your computer.
as prompted.
Only
for NVIDIA
User's Guide