the secondary display when its resolution is set to less than the value set on the
primary display.
Procedure
Follow these steps to enable Virtual Desktop:
1 From your Windows desktop, right click to view the Windows desktop menu,
then click Properties > Settings > Advanced and then the NVIDIA GPU tab.
2 From the NVIDIA menu, click the nView Display Setting option.
3 From the nView Modes list, select Clone and click Apply.
Note: If you just switched to Clone from Dualview, you'll need to follow the
4 From the nView Display Setting page, right click display image (i.e., 1a or 1b) to
display the pop-up menu and click Change Resolution
Figure 4.16
Click Change Resolution from
your secondary display's context
menu.
NVIDIA Corporation
prompts to restart your computer. Then, when you have returned to your
desktop, go to the nView Display Setting page and select Clone from the
nView Modes list and click Apply.
nView Clone Mode with Virtual Desktop Enabled — Disabling Panning
Using nView Multi-Display Settings
(Figure
4.16).
Chapter 4
63