Figure A.6 Four Displays With Identifying Numbers - Nvidia VCQFX550PCIEPB - Quadro FX 550 User Manual

Appendix A
Using Two NVIDIA GPU-Based Graphics Cards (Non-SLI Configuration)
2 Right click display image 2, click Attached and click Apply. The associated
display becomes enabled and displays a desktop.
3 Right click on display image 4, click Attached and click Apply. The associated
display becomes enabled and displays a desktop.
Figure A.5
and the resulting desktops on the numbered displays.
Figure A.6
Note: Attaching all the displays implies that nView Dualview mode is enabled. If you
check the nView Display Settings page for either of the NVIDIA-based
graphics cards that are installed, you will see that nView Dualview mode is
enabled.
1 From the Windows Display Properties Settings page, right click any of the four
display images.
2 Click Properties and then click the NVIDIA GPU ab to open the associated page.
3 Click the nView Display Settings menu option. Notice that the nView Modes list
is set to Dualview.
170
and Figure A.6 show the associated Display Properties Settings page
Four Displays With Identifying Numbers
User's Guide