Figure 4.10 Display Properties Settings - Dualview Mode (Windows 2000) - Nvidia VCQFX550PCIEPB - Quadro FX 550 User Manual

Chapter 4
Using nView Multi-Display Settings
4 When the prompt appears, click Restart Now.
Note: When the system starts up, you may see a series of Dualview installation
5 After the system starts up, if the NVIDIA nView Desktop Manager Setup Wizard
appears, run through the Wizard. (See the NVIDIA nView Desktop Manager User's
Guide for details.)
6 From your desktop, right click to view the Window desktop menu, then click
Properties and the Settings tab.
You'll notice that at least two display images appear on the Windows Display
Properties Settings page, as shown in
Figure 4.10
7 Click Advanced, the NVIDIA GPU tab, and the nView Display Setting menu
option.
8 From the nView Modes list, select Dualview.
9 Follow the prompts to restart your computer again.
54
prompts. It may take up to one minute for the first Dualview prompt to
appear. Click the confirming prompts (such as, Yes, OK, or Finish) to follow
through and then restart your computer as prompted.
Display Properties Settings — Dualview Mode (Windows 2000)
Figure 4.10, indicating Dualview mode.
User's Guide